Document destruction conveyors built to spec

Metering control via VFD lets operators trim the feed rate to shredder load in real time, the single most effective defense against jams and reverses.

Cleats and sidewalls hold loose paper, file folders, and round stock on the incline instead of letting it roll back at the feed angle.

Hoppers, chutes, and transitions direct paper into the shredder throat or baler charge box so material drops square instead of hanging at the transition.

Covers and guarding enclose transfer points to contain spillage and loose paper, which matters as much for a controlled security workflow as it does for housekeeping.

E-stops and pull cords are positioned for reach along the run and configured to support compliance with applicable conveyor safety standards.

Belt scrapers and wipers keep shredded-paper carryback off the return side, reducing cleanup and buildup under the line.

Speed sensors trigger alarms or shutdowns on belt slip or stall, protecting the drive and flagging a feed problem before it becomes a jam.

Dust control flanges capture the fine particulate that paper shredding generates at discharge and transfer points.

Dead man plates, halo lights, and alarms round out the safety package on lines where operators work close to the feed.